|
Bid Documents
Note: Any Bid Documents downloaded from sources other than the official Palm Beach County Engineering & Public Works Department, Roadway Production Division website may not be the official and final version, and may result in the rejection of your Bid Document submittal. Palm Beach County Engineering & Public Works Department Roadway Production Division, Suite 3W-33 2300 N. Jog Road West Palm Beach, FL 33411 (561) 684-4150 Current Available Bid Documents Bid Document #2003512&98506B Project Name: 45th Street from Jog Rd. to E. of Haverhill Rd. & Jog Road from S. of 45th St. to N. of 45th St. Pre-Bid Meeting: September 24, 2009 @ 10:00 AM Project Estimate: $27 Mil. Bid Opening Date: October 27, 2009 Disclosure Form The disclosure form link allows the Roadway Production Division "Division" to build/maintain a database of interested bidders. This database will be used by the Division to notify bidders of project information updates (Addendums, bid date changes, etc.). this information enables the Division to e-mail notifications to the firms that submit disclosure forms. It is optional, but recommended. Request for Information (RFI) Submittals The RFI link is provided for PROJECT SPECIFIC inquiries. Bidders may use this link to email the Department with questions that require clarification of bid documents. Addendums All Addendums will be posted on this website as they are issued. It is the sole responsibility of the bidder to routinely check this website for any and all Addendums that are issued. These Addendums contain important information that may directly impact your bid. Failure to acknowledge an Addendum may result in the rejection of your Bid Document submittal. Submitting a Bid To submit a bid, print and submit a hard copy of the required documents (see checklist included under the Bid Documents link listed below) and respond by the Due Date and Time in accordance with Section 2 of the General Provisions. Printing Requirements Adobe Acrobat Reader must be used to view .pdf files on this Web Site. Note: When printing plan sheets, verify that you have selected "Send Graphics as Raster". This can be found in your "Print Setup" under "Properties" and "Details", failure to do so may result in text and line irregularities on your plan sheets when printed.
|